HomeMy WebLinkAboutMiscellaneous - Exception (646)MODELS "SBO", "SBS"
BAKER'S PRODUCTION TABLE SERIES
a�
heavy duty frames can be adapted Tor omer areas Ul lute•
* 21/4" thick Hard Rock Maple top style "BKSC" with natural mineral oil finish.
* Stainless frames are fabricated from 11/2" square 16 gauge Stainless Steel tube Type 300.
* Galvanized frames are fabricated from V/2" square 16 gauge pre-galvanized tube — not plated.
* Legs are 15/8" o.d. 16 gauge tube; crossbracing is 11/4" o.d. 16 gauge tube.
* Optional coved or straight risers available on model "BKSC' maple top.
* Optional 16 gauge undershelves available on model "SBO" frames (partial undershelves available on model "SBS" frames).
* Frames shipped all welded, set-up.
* Approved by the National Sanitation Foundation.
* Stands 36" high to work surface with 11/2" adjustable bullet feet.
* Optional drawers, casters, pot racks and more available.
*NSFo
— NOTE —
Frames and Tops may be purchased individually or as complete table units.
Refer to Price List for ordering information.
PAGE 3
51
�J
MODELS "TC", "MBR" f�_ fwd f��9i1;
®
STAINLESS STEEL BONING AND TRIMMING TABLE SERIES
NSF.
MODEL "TC"
TC -1 w/6" Backsplash (removable)
TC -2 w/6" Backsplash
and 6" Rear Deck (removable)
TC -3 — Flat Top Table only,
no Deck or Splash.
TC -4 — 6" Backsplash,
12" Rear Deck
Tapered End Returns (removable)
TC -6 w/6" Boxed Backsplash
(non -removable)
TC -7 w/6" Boxed Backsplash
and 6" Rear Deck (non -removable)
T;
BOOS Model "TC" Tables are ideal boning and trimming tables for supermarkets, deli's, restaurants and all other areas of foo
preparation. Stainless Steel Frames give you more return on your dollar. Model "TC" Tables provide high quality and superior strength and
durability for a minimal investment.
* Frame is fabricated from 11/2" square 16 gauge Stainless Steel a_t
ly 1000 Top is reversible and resists warping, crackin�andwill
tube Type 300, with #3 polish. dull knives.
* Heliarc welding used throughout. * Optional Cutting Surfaces available include '/2" -and -1-" thick`Poly
* Superstructures (backsplashes) are 16 gauge Stainless Steel 1000, and 11/2" thick Hard Rock Maple.
Type 300. * Optional Stainless Steel lower shelves are 18 gauge Type 300,
* Legs are 15/8" o.d.16 gauge Stainless Steel tube; crossbracing is 12" above floor. Dunnage rack type also available.
11/4" o.d. 16 gauge Stainless Steel tube. * Approved by the National Sanitation Foundation and the U.S.
* 3/4" thick Poly 1000 top is held in place by welded clips and is Standard Department
of Agriculture.
lwelded set-up. Available knocked -down
removable for ease in cleaning.
* Poly 1000 Top is sectioned per National Sanitation Foundation with Rigitruss, please specify.
regulations. One piece tops are available at no extra charge — * Stands
variety of options available.
aitljustable bullet feet.
please specify.
NYLOK (NYLON COATED) MEAT BOAT RACKS Nylok Meat Boat Racks
k
Stainless Steel Paper
Holder Model MPH01 —
optlon. All welded structure
easily attaches to underside
of rack.
Removable 6" Backsplash,
12" Deck, Tapered End Re-
turns — standard
e-turns—standard on TC -4. All
welded rear superstructure
allows for the very best in
sanitation. Easy to clean.
3/4" Poly 1000 Cutting
Surface — Standard.
Reversible, resists warping
Oand cracking. Sectioned to
pass NSF and USDA
standards. One piece tops
available — must specify.
Illustrated: Model TC 4 72" x 00"
Model MBR—Option. Rac s
are 12" deep x 32" high. 3' to
10' in length —modular sec-
tions. Dividers fit snug but are
easily adjustable. Shipped
K.D. easytoassemble. Racks
are available Table, Ceiling,
Wall, or Shelf mount.
Table Mount Superstruc-
ture for Meat Boat Rack —
Option. Stainless Steel chan-
nels. Uprights boltto rear legs.
Double Platter Shelf —
Model PS02 — Option.
Stainless Steel Platter Shelf
is welded to frame for strength
and stability. Shelf portion is
slotted for easy water drain
and cleaning. Single Platter
Shelves available.
Bullet Feet—Standard. 11/2"
adjustable in height.
PAGE 4