HomeMy WebLinkAboutSprinkler Inspection Report - Correspondence - 815 CHESTNUT STREET 10/9/2019 N'5 7-,�
SPRINKLER INSPECTION REPORT
PAGE 1
A.S.A.P. Sprinkler LLC
6 Progress Ave. Unit #3
Tyngsboro, Ma. 01879 one 978 649 4945 Fax 978-649-9445 Contat
Company Name City pateateV -
Street 1 � `.i?t� 'tOV +�)�'
,... - Technician
Rate of Tr Test
Owners Section(To be answered by owner or occupant}
A.Explain any occupancy hazard changes since the previous inspection.
B. Describe Eire protection modifications made since the last Inspection-
C. Descf4be any fires since the last inspection
D. When was the system piping last checked for stoppage,corrosion or foreign material? �—
E.When was the dry-piping system last checked for proper pitch?
F.Are dry valves adequately protected from freezing? NO
ES
o Inspector's Section{All responses reference current Inspection} Y�
1.6ENERAL
a.is the building occupied? i
t
6.Are all systems in service?
c.is there a minimum of 18 in clearance between the top eastio be pr PeY heatedge and Sprinkler etneall afB reas including blind
d.ln areas protected by wet system,does the building app ear to be protected against freezing
attics and perimeter areas,where accesible7 Do all exterior openings appear
XXXXXXXXX XXXXXXXXX
2.CONTROL VALVES(See Item 141 ry riate position?
a.Are all sprinkler system control valves and all other valves in app p
en position and locked,sealed or equipped with tamper? XXXXXXXXX XXXXXXXXX
P
b.Are all control valves in the op P
d'P
3.WATER SUPPLIES(see Item 14)
a.Was a water flow test of main drain made at the sprinkler riser?
XXXXXXXXX XXXXXXXX
4.TANKS,pUMPS,FIRE DEPARTMENT CONNECTIONS
a.Are fire pumps,gravity tanks,reserviors and pressure tanks in good condition and maintained?
b.Are FD connection In satisfactory condition,couplings free,caps in puce.&check valves tight? ✓
Are they accessible and visible? XXXXXXXXX XXXXXXXXX
S.WET SYSTEMS(See item 13)
a.Are cold weather valves(OS&Y)in the appropriate open or closed position?
b. Have anti-freeze system solutions been tested?
X
c.Were the antifreeze test XXXXXXXeeze test results satisfactory? E
6.DRY SYSTEMS(See Items 10-14)
a.Is the dry valve in service? /
b.Are the air pressure&priming water level in accordance with the manufacturers Instructions?
c.Were the antifreeze test results satisfactory?
d.Wire low points drained during the inspection?
e. Did quick-opening devices operate satisfactory?
f.Did the dry valve trip properly during the trip pressure test?
g. -pipe valve room Operate at the time of inspection? XXXXXXXXX XXXXXXXXX
Did the heating equipment in the dry
7.SPECIAL SYSTEMS(See Item 16) operate properly during testing?
a.Did the deluge or pre-action valves
b.Did the heat-responsive devices operate properly during testing? XkIIXXXXXX %%%%XXXXX
c.Did the supervisory alarm service test satisfactory?
8.ALARMS
a.Did water motor and gong test satisfactory?
b,Did electric alarm test satisfactory?
Did supervisory alarm service test satisfactory? XXXXXXXX XXXXXXXXX
9.SPRINKLERS
a.Are all sprinklers free from corrosion,loading or obstruction to spray discharge?
b.Are sprinklers over So years old,thus requiring sample testing?
c.Is stock of spare sprinklers available? ear to be satisfactory
d.Does the interior condition of sprinkler system appe
ar
temperature rating for their location?
e.Temperature.Are sprinklers of proper
A.S.A.P.Sprinkler LLC
INSPECTION REPORT Page 2
6 progress Ave. Unit#3
Tyngsboro,Ma.01879
Phone:979-6494945 fax 978-649-!Model?����
Wet Systems No? ( Mahe a
Dry Systems No? Make and model?
Special systems No? Type• Condition
Make and Model
10.Date dry-pipe valve trip tested(control valve partially open)
11.Date dry-pipe valve trip tested(control valve fully open)
12.Date quick-opening device tested
13.Date deluge or preaction valve tested
14.See Control Valve Maintenance Table. Signs Abnormalities
Num
ber Type Open Secured Closed
Control Valves
a V,
City Connection control
Tank Control ✓" v�
Pump Control
sectional Control
t�
System Control YIN-
�-"
other control
Psl _
Water Pressure? -I ' .
Fire Pump,_,_
Water flow test? r`�c 3 (if none made WHY?) ,
. +
16.Heat Responsive Device
Test Method
Type of Equipment
Manufacturer
Test Results: A B c D E`
C D E�_ _F Valve#
valve# —A B -A B C D E_—F
A B C D E^—F Valve# �_ E� F
Valve# Valve# A B C D
A B D E—F �— D E^_ F
Valve# C Valve# A B G '
A B C D E__F —
Valve# Location? Test Result?
Auxiliary Equipment:No? Type?
17.Explain any"No'answers and commentsc
18,Adjustments or corrections made during this inspection:
9;QjFhough these c mments are not the result of an engineerin review,the following desirable improvements are recommended.
Cust Signature/date
r�C?M License
Technician C