HomeMy WebLinkAboutSprinkler Inspection Report - Inspection - 490 MAIN STREET 7/30/2019 A.S.A.P. Sprinkler LLC SPRINKLERINSPECTION REPORT PACE
:`r gr sf�Ave. Unit
Tyngsboro,, Mai. 01 ,Phone 78- 4 -4 45 Fax 8-64 - 445
Company a e Contact 'F 4 -0..y..,
city \A State
Date of Trip Test -.. � n . D ..�
ate
Owners Section(To be answered by owner or occupant)
A. Explain any occupancy hazard changes since the previous inspection.
8. Describe fire protection modifications made since the last inspection.
C.Oescribe any fires since the last inspection
D. When was the system piping last checked for stoppage,corrosion or foreign material?
E.When was the dry-piping system last checked for proper pitch?
F.Are dry valves adequately protected from freezing?
Inspector's Section(All responses reference current inspection)
L ENERAL YES
NO
a. Is the building occupied?
b.Are all systems in service?
c, Is there a minimum of 18 in clearance between the top of storage and sprinkler deflector?
d. In areas protected by Bret system,does the building appear to be properly heated in all areas including blind p r
attics and perimeter areas,where acceslble?Do all exterior openings appear to be protected against freezing
. CONTROL VAL E (See item 14) XXXXXXXXX XXXXXXXXX
aF Are all sprinkler system control valves and all other values in appropriate position? �
b.Are all control valves in the open position and-locked,sealed or equipped with tamper?
.WATER-SUPPLIES(see item 14) }{]{}{XXX 7L XXXXXXXXX
a.Was a water flow test of main drain made at the sprinkler risen
4.TANKS,PUMPS,FIRE DEPARTMENT CONNECTIONS XXXXXXXXX XXXXX c
XX
a.Are fire pumps,gravity tanks, reservlors and pressure tanks in good condition and maintained?
b.Are FD connection in satisfactory condition,couplings free,caps In place&check valves tight? �.
Are they accessible and visible?
S. WET SYSTEMS(See item 13) XXXXXXXXX XXXXXXXXX
a.Are cola weather valves(05 Y)in the appropriate open or closed position?
b. Have anti-freeze system solutions been tested?
c.Were the antifreeze test results satisfactory?
6. DRY SYSTEMS(See items 18-14) f X?{}(?i?ti~[i~[}C XXXXXXXXX
a. Is the dry valve in service?
b.Are the air pressure&priming water level In accordance with the manufacturers instructions?
C.Were the antifreeze test results satisfactory? #'
d.Wire low points drained during the inspection? °}
e. Did quick-opening devices operate satisfactory? �
f. Did the dry valve trip properly curing the trip pressure test? Z
W.
g.Did the heating equipment in the drys-pipe valve room operate at the time of inspection?
7.SP.ECIAL-SYSTEMS(See Item 1 ) XXXXXXXXX XXXXXXXXX
a. Did the deluge or pre-action valves operate properly during testing?
b.Did the heat-responsive devices operate properly during testing?
c. Did the supervisory alarm service-test satisfactory?
8.ALARMSXXXXXXXXX XXXXXXXXX
.:
a.Did grater motor and gong test satisfactory?
b. Did electric alarm test satisfactory?
. Did supervisory alarm service test satisfactory? �
.SPRINKLERS XXX XXX XXXXXXXXX
a.Are all sprinklers free from corrosion, loading or obstruction to spray discharge?
b.Are sprinklers over.50 years old,thus requiring sample testing? �•
c.Is stock of spare sprinklers available?
d. Does the interior condition of sprinkler system appear to be satisfactory
e.Temperature.'Are sprinklers of proper temperature rating for their location?
fF .,.
t
A. .A.R Sprinkler LLL INSPECTION REPORT Page
Progress Ave. Unit##3
Tyngsb r ,Ma.01879
Phone:978- 49-494 Fax 978- 49-9445 �
Wet Systems o? flake and models :5 kC' "') �_... :..���
Dry Systems No? Make and model?
Special Systerns o Type?
Make and Model Condition
Y'I 1141111Yi- PPPIIIIIiiitl0i4Ni
10.Date dry-pipe valve trip tested(control valve partially open)
11.Date dry-pipe valve trip tested(control valve fuIly open)
12.Date quick-opening device tested
13.Date deluge or preaction valve tested
14.See Control Valve Maintenance Fable.
Control Varies Number Type Open Secured Closed Signs Abnormalities
4
City Connection Control �
Tank Control
Pump Control
Sectional Control
System Control �
Other Control q0
,
Water Pressure V Tank PSI Fire Primp
Water how test?--\&
wy (l f none made WHY?)
LOUP
I II INKY• PPIh IIYYIY'
1
:P7
7.
F I
i
1 .Heat Responsive Device
Test Method
Type of Equipment
Manufacturer
Test Results:
Valve 4 A ft---C D E „�
�� A
l` Valve ��_
Valve# Valve B
Valve# A BCD E _ Valve
Valve A C D E _ Valve A B
Auxiliary Equipment:No> Type? Location? Test Result?,_...
17.Explain any"No"'answers and comments:
18.Adjustments or corrections made during this inspection:
ltho� gh these comm is are not the�r uIt of are engineering review, �x.
F g tl��following desirable improvements are recommended.
W. v, {TA
Technician '� c f.
La
' ease ' ust Signature/date .r