HomeMy WebLinkAboutSprinkler Inspection Report - Inspection - 660 GREAT POND ROAD 2/15/2022 A.S.A.P. Sprinkler LLC SPRINKLER INSPECTION REPORT PAGE 1
6 Progress Ave. Unit #3
Tyngsboro, Ma. 01879 Phone 8-Ct49-4945 Fax 978-649-9445 �>
Company Name / c ff Con act -:2 Z
Street Cit State
Date of Trip Test Technician . s Date f
Owners Section(To be answered by owner or occupant) r— l
A.Explain any occupancy hazard changes since the previous Inspection.
B.Describe fire protection modifications made since the last inspection.C.Describe any fires since the last Inspection
D. When was the system piping last checked for stoppage,corrosion or foreign material? l1 �!�t
E.When was the dry-piping system last checked for proper pitch? AZO
F.Are dry valves adequately protected from freezing?
Inspector's Section(All responses reference current inspection)
I.GENERAL F YES NO
a.Is the building occupied?
b,Are all systems in service? 1 �'
c.Is there a minimum of 18 in clearance between the top of storage and sprinkler deflector?
d.In areas protected by wet system,does the building appear to be properly heated in all areas Including blind
attics and perimeter areas,where accessible?Do ail exterior openings appear to he protected against freezing? y/
2,CONTROL VALVES(See Item 14) Xxxxxxxxx XXXXXXXXx
a.Are all sprinkler system control valves and all other valves in appropriate position?
b.Are all control valves in the open position and locked,sealed or equipped with tamper?
3.WATER SUPPLIES(see Item 14) XxxxxxxxX xxxxXxxxx
a.Was a water flow test of main drain made at the sprinkler riser?
4.TANKS,PUMPS,FIRE DEPARTMENT CONNECTIONS xXxxxxxxx xxxxxxxxx
a.Are fire pumps,gravity tanks,reservoirs and pressure tanks in good condition and maintained?
b.Are FD connection in satisfactory condition,couplings free,caps in place&check valves tight?
Are they accessible and visible?
S.WET SYSTEMS(See Item 13) xxxxXxxxx XXXxXxxxx
a.Are cold weather valves(OS&Y)in the appropriate open or closed position?
b.have anti-freeze system solutions been tested?
c.Were the antifreeze test results satisfactory?
6.DRY SYSTEMS(See Items 10-14) xxxxxxxxx XXXXXXXX
a.Is the dry valve in service?
b.Are the air pressure&priming water level in accordance with the manufacturers instructions?
c.Air compressor on/off as required?
d.Were low points drained during the inspection?
e.Did quick-opening devices operate satisfactory?
f.Did the dry valve trip properly during the trip pressure test?
g.Did the heating equipment In the dry-plpe valve room operate at the time of Inspection?
7.SPECIAL SYSTEMS(See Item 16) XXXXXXXXX XXXXXXXXX
a.Did the deluge or pre-action valves operate properly during testing? /
b.Did the heat-responsive devices operate properly during testing?
c.Did the supervisory alarm service test satisfactory?
S.ALARMS X XXxXxxx xX 7xxxx�x_x
a.Dld watea of r and gong test satisfactory? G rye
b.Did electric alarm test satisfactory?
c.Did supervisory alarm service test satisfactory?
9.SPRINKLERS - XXXXXXXXX XXXXXXXXX
a.Are'all sprinklers free from corrosion,loading or obstruction to spray discharge?
b.Are sprinklers under required UL testing age?
c.Is stock of spare sprinklers available?
d.Does the Interior condition of sprinkler system appear to be satisfactory
e.Temperature.Are sprinklers of proper temperature rating for their location?
Invoice#f
A.S.A.P.Sprinkler LLC INSPECTION REPORT Page 2
6 Progress Ave. Unit#3
Tyngsboro,Ma.01879
Phone:978-649-4945 Fax 978-649-9445
Wet Systems No? ! Make and model? --
Dry Systems No? / Make and model?
Special Systems No? Type?
Make and Model Condition
10.Date dry-pipe valve trip tested(control valve partially open) �Wi/L�rp
11,Date dry-pipe valve trip tested(control valve fully open)
12.Date quick-opening device tested
13,Date deluge or preaction valve tested
14.See Control Valve Maintenance Table.
Control Valves Number Type Open Secured Closed Signs Abnormalities
City Connection Control / v 7 'r
Tank Control
Pump Control
Sectional Control
System Control
Other Control
Water Pressure? r Tank A,-eI P51 Fire Pump,
Water flow test? �-/ (If none made WHY?)
Test pipe Size pipe Pressure Flow Pressure Test pipe Size test Pressure f low Pressure
located b efo re pressure after located2 pipe before2 pressure2 after2
16.Heat Responsive Device
Test Method
Type of Equfpment
Manufacturer
17.Explain any"No"answers and comments: I
18.Adjustments ar corrections made during this inspection: ��41
'
19,Although these comments are not the result of an engineering review,the following desirable improvements are recommended.
/ ? o
r �
,Comments/SpecialNote
Technician L, l.icens Q 1Z.Xe; CustSignature/date