HomeMy WebLinkAboutMiscellaneous - Exception (647)MODELS "M "GMT" GALVANIZED CUTTING TABLE SERIES
ECONOMY KNOCKED DOWN
MODE'aretM"
Model "M" Tables he lowest priced
—�
cutting tables from JOHN BOOS. The high
quality standards of all BOOS products arek:
reflected in Model "M" tables. Galvanized
,o, t M®,
steel provides low cost and high strength
efficiency for any food preparation area.,
M — Flat TDD, No Deck or Splash.
M-1 — 6" S.S. Backsplash, (removable)
_ - A— -
* Frame is fabricated from 11/2" square 16 gauge.pre---
galvanized steel — not plated like most galvanized
products.
* All superstructures (backsplashes) are 16 gauge Stain-
less Steel Type 300.
* Legs are 15/6" o.d. 16 gauge pre -galvanized;
Crossbracing is 1Y4" o.d. 16 gauge pre -galvanized
tube.
* Standard 3/4" thick Poly 1000 top is removable for
ease in cleaning and held in place by removable
stainless steel clips.
* Poly 1000 top is 5000ngd per National Sariltation
Foundation regulations. One piece tops available —
please specify.
Pictured: V'
Lengths. 3' to 10'
Widths: 24' 30", 36"
-' Poly 1000 Top is reversible and resists warping,
cracking, and will not dull knives.
* Optional cutting surfaces available are 1/2" and 1"
thick Poly 1000, and 11/2" thick Hard Rock Maple.
* Optional 18 gauge Galvanized lower shelves, 12"
above floor.
* Approved by the National Sanitation Foundation and
the U.S. Department of Agriculture.
* Standard shipped knocked -down. Available all
welded, set-up — please specify.
* stands 36 NO 118' adios{able bullet feet.
* Wide variety of options includes drawers, platter
shelves, etc.
OSNSF . BREAKING TABLE SERIES
MODEL "GMT"
Model "GMT" Breaking Tables combine the features of modern steel tables and sturdy old-
fashioned butcher blocks. These poly top tables are built especially for the supermarket, meat
plant or food service operation that requires high-strength breaking tables.
Frames are fabricated from 11/2" square tube
16 gauge Type 300 Stainless Steel.
* Legs are 15/8" o.d. 16 gauge ss tube;
Crossbracing is 11/4" o.d. 16 gauge ss tube.
* Optional 6" backsplash is 16 gauge Stain-
less Steel Type 300 18-8.
* Cutting surface is 11/2" thick comprised of
two 3/4" thick Poly 1000 boards providing
four cutting surfaces for longer service.
Poly 1000 tops are reversible and resist
warping, cracking, will not dull knives and is
removable for ease in cleaning.
PAGE 5
* Poly tops are sectioned per National Sanita-
tion Foundation regulations. Two one piece
tops are available — please specify.
* Approved by the National Sanitation
Foundation and the U.S. Department of
Agriculture.
* Model "GMT" shipped standard all welded
Setup. Available knocked down with
Rigitruss. Please specify.
* Stands 36" high with 11/2" adjustable bullet
feet.
Lengths: 24", 30 36", 40", 50 60", 72"
Widths: 24", 30", 36"
I
i
i
MODELS "ESS", "S16"
i
16 GAUGE STAINLESS STEEL TOP TABLE SERIES
I
i
o
P.:
PICTURED ABOVE —
"S16R"
" Top is 16 gauge Stainless Steel Type 300, with #3 polish.
* Reinforced wi%It 111 X 2" tub@ running entire length.
* 11/2" stallion edge on front and rear on flat top models. Side edg69
feature 90° bends for table lineup.
Legs are 15/8" o.d. 16 gauge Stainless Steel Type 300 or pre -
galvanized steel; crossbracing (on open base models) is 1'/4" o.d.
16 gauge stainless steel or pre -galvanized steel.
" 18 gauge undershelves are Stainless Steel Type 300 or galvanized
steel, 12" from floor.
* 6" high boxed coved riser standard on certain models.11/2" turn -up
available at no extra charge on flat top units.
* All Model "316" and "ESS" Tables are approved by the National
Sanitation Foundation and U.S. Npartment of Agriculture,
* Standard shipped knocked -down. All tables available set-up, all
welded if specified.
` Stands 36" high with adjustable bullet feet.
" Wide variety of options available.
Model
Top Description
Base Description
ESS
Flat— No Riser
Galvanized Legs
& Lower Shelf
ESSB
Flat — No Riser
Galvanized Legs
and Lower Bracing
S16
Flat — No Riser
Stainless Steel Legs
and Lower Shelf
S16B
Flat — No Riser
Stainless Steel Legs
and Lower Bracing
S16R
6" Coved Riser
Stainless Steel Legs
on Rear
and Lower Shelf
S16RB
6" Coved Riser
Stainless Steel Legs
on Rear
and LOWer l3racing
:lU_U_!!!-_.*"
PICTURED ABOVE —
"S166"
Lengths: 3' to 10'
Widths: 24", 30", 36"
MODEL "ESS" & "S16"
Model "ESS" and "S16" Tables feature the best possible work
surface— Stainless Steel. The 16 gauge Stainless Steel Tops can be
used in supermarkets, restaurants, processing plants, even industrial
shops. Recognized by many of the nation's largest supermarket and
restaurant chains, BOOS Model "ESS" and "S16" Tables provide high
quality and strength at minimal costs.
Close up of Stallion Edge Standard on all SS Top Work Tables
PAGE 6